Car Parking Ventilation System.

Ventilation in the Car parking area can be measured and controlled by controlling the CO2 value in the Basement area.

Whenever CO2 level in the Basement area is above set value, respective Blower, Exhaust fan will on to make the CO2 level with in 10 ppm.

The complete operation can be monitored and controlled with the PLC & BMS control system.

Solution Offered with Products
  • PLC – ABB PM – 554, DC 561 & AI 561
  • DCS (Building Management System)


Challenges & Other additional solutions offered

Our Armax team has put more effort to successfully complete the project and enabled the end-user to use the machine user – friendly and made them feel happy.


Oil Quenching Vacuum Furnace.

Heat treatment of special purpose component uses for Aerospace applications. By using appropriate vacuum controlling method to perform 16 different stages of heating cycles to Heat treat the component. The cooling process can be done with the use of recommended Heat treatment oil. The complete operation can be controlled, monitored and recorded with the PLC , HMI and SCADA systems.

Solution Offered with Products
  • PLC – ABB PM – 573, AX -522, DI-524 & DI-523
  • SCADA – Movicon (2000 tags )
  • HMI- ABB CP-435 T
  • Other devices – Eurotherm-2404


Challenges & Other additional solutions offered

Since it was newly designed project by the end-user, our Armax team has put more effort to successfully complete the project and enabled the end-user to use the machine user – friendly and made them feel happy .


Automated solar power plant.

Solar power is the conversion of sunlight into electricity. Sunlight can be converted directly into electricity using photovoltaic(PV), or indirectly with concentrated solar power (CSP).

Required data's from solar panels, LT meters, HT meters, Weather monitor, Inverters are monitored in scada system and database is been created for report generation for ( Daily, Monthly, Yearly).

Solution Offered with Products
  • SCADA MOVICON11.2 ( 1000 TAGS).
  • SCAN RS 485 CONVERTER .
  • PERSONAL COMPUETR (32 BIT,2GB RAM,WINDOWS 7)


Challenges & Other additional solutions offered

Since it was newly designed project by the end-user, our Armax team has put more effort to successfully complete the project and enabled the end-user to use the machine user – friendly and made them feel happy.


Koji Room Automation.

Maintaining appropriate temperature for the growth of enzymes kept in Koji Room.

Enzymes will be kept in plates for almost 120 hours and the temperatures are maintained in the room with the help of Spray chillers as well as the AHU system. The temperature monitoring and controlling of the entire system is been programmed and controlled with the PLC , HMI and SCADA.

Solution Offered with Products
  • PLC - Abb
  • SCADA - Movicon and
  • HMI- Abb, Redlion.


Challenges & Other additional solutions offered

  • Koji Room Automation is the Asia's first automated plant.
  • Calibration of sensors to maintain room temperature as per the requirement.
  • Special requirements compared to existing one.
  • Adapt the structure and the behavior of the system to environment driven changes.

Scope of Our Work:

  • PLC Panel ,Programming(PLC,scada,HMI) , Sensors, Cable Ducting.
  • Excel Reporting, Time based Data logging, Historical Trend.
  • Room wise Parameter mimic


Reclaimer section Automation.

In Cement process, it reclaims the stored material by the rotation of bucket wheel. The bulk material is first unloaded to the inverted belt conveyor on the bridge via the loading board. Then, the material is unloaded to the belt conveyor in the yard via the funnel, which is under the machine center.

Raw material reclaiming process can be controlled with the PLC, HMI and Drive systems.

Solution Offered with Products
  • PLC – ABB PM – 571 Eth
  • Drive - ACS 550
  • HMI- ABB CP-410 M





Stacker section Automation.

In Cement process, Stacker is ideal for both Prehomogenisation and Buffer storage. Lime stone crushers crush the limestone to minus 80 mm size and discharge the material onto a belt conveyor which takes it to the stacker via bulk material analyzer. With the increasing variation in the grades of coal used for coal firings installations, there is a growing need for prehomogenization and storage of coal.

In this project, Stacker is using for storage of Lime stone.

Raw material stacking process can be controlled with the PLC, HMI and Drive systems.






Flocculant Control System.

Flocculants are liquid or granular, and by imparting an electrostatic charges to the suspended particles , this charge turns the particle to attract each other .

It accelerate the settling process of suspended particles in the liquid.

This leads to the potential use of smaller thickeners'

The complete operation can be controlled and monitored with the PLC , HMI and Drive systems.






Water Treatment Plant

Water Treatment Plant 40 MW -Captive Power Plant

40 MW -Captive Power Plant

This is for automated Water Treatment plant for 40 mw captive power plant. The salts have to be removed from the water, and that is done by a water DM Plant.

Redundancy has been done for all equipments like PLC, SCADA, PS & Comm. module system to protect the system getting down during malfunctions.






CIP & SIP Machine

Fully Automated Cleaning in place & Sterilization in place machine.

It is used in the place where the equipment requires Cleaning and Sterilization after its every use.

It is the efficient, reliable and cost saving method to clean Chemical vessels, high pressure pumps and spray nozzles free from dirt, organic contaminants and micro-organisms.

The complete operation can be controlled, monitored and the data's can be recorded and printed with the PLC , HMI and printer systems.






Scrubber Automation.

This system has Seven VFD controlled pumps which are controlled by ABB AC 500 PLC with its IO modules.

The complete operation can be controlled with the PLC , HMI and Drives systems.